Centreon not updating

With Paessler MIB Importer you can import these MIB files and convert them into OID libraries for PRTG.

This way, you can easily setup SNMP Library sensors.

Would I set the firewall to allow incoming on port 1023? No matter what the Sophos version is, as long as the PRTG server is authorized to the Sophos, then set PRTG to V1.

PRTG set to V2c and V3 seemed to balk and give no sensors. Right click the device, Edit, Settings, scroll down to Credentials for SNMP, uncheck it and then check that the version is V1.

Do an auto discovery on that device and it should find a bunch of stuff for you. Got it from a network guy across the way who was messing around. This may or may not apply to you, but I was running PRTG in Server 2016 on a Hyper-V host connected obviously to a virtual switch that was physically a 6 NIC Team on my Host. Connected the vm to a single network card instead of the team and all my problems went away.

Before I would get slow, spotty peformance, maybe 1/10 or at best 3/10 repsonses to my snmp polls. If anyone ends up here and is teaming their nics for prtg, I'd suggest against it. If you want to keep snmpd running on reboot type: snmp service enable ( port) Then you can manually add snmp users via: snmp user add commands or Go into expert mode: cd /etc/snmp vi snmpd.users.confadd for example: rocommunity SNMPSTRING Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Before applying any instructions please exercise proper system administrator housekeeping.

[1350944995.772758] [002.0] [pid=32199] DELETE FROM nagios_timedeventqueue WHERE instance_id='1' AND event_type='1' AND scheduled_time=FROM_UNIXTIME(1350944995) AND recurring_event='1' AND object_id='0'[1350944995.774559] [002.0] [pid=32199] INSERT INTO nagios_timedevents SET instance_id='1', event_type='1', queued_time=FROM_UNIXTIME(1350944995), queued_time_usec='770306', scheduled_time=FROM_UNIXTIME(1350944996), recurring_event='1', object_id='0' ON DUPLICATE KEY UPDATE instance_id='1', event_type='1', queued_time=FROM_UNIXTIME(1350944995), queued_time_usec='770306', scheduled_time=FROM_UNIXTIME(1350944996), recurring_event='1', object_id='0'[1350944995.776226] [002.0] [pid=32199] INSERT INTO nagios_timedeventqueue SET instance_id='1', event_type='1', queued_time=FROM_UNIXTIME(1350944995), queued_time_usec='770306', scheduled_time=FROM_UNIXTIME(1350944996), recurring_event='1', object_id='0'[1350944996.770555] [002.0] [pid=32199] INSERT INTO nagios_timedevents SET instance_id='1', event_type='1', event_time=FROM_UNIXTIME(1350944996), event_time_usec='770461', scheduled_time=FROM_UNIXTIME(1350944996), recurring_event='1', object_id='0' ON DUPLICATE KEY UPDATE instance_id='1', event_type='1', event_time=FROM_UNIXTIME(1350944996), event_time_usec='770461', scheduled_time=FROM_UNIXTIME(1350944996), recurring_event='1', object_id='0'[1350944996.772449] [002.0] [pid=32199] DELETE FROM nagios_timedeventqueue WHERE instance_id='1' AND event_type='1' AND scheduled_time=FROM_UNIXTIME(1350944996) AND recurring_event='1' AND object_id='0'[1350944996.774127] [002.0] [pid=32199] INSERT INTO nagios_timedevents SET instance_id='1', event_type='1', queued_time=FROM_UNIXTIME(1350944996), queued_time_usec='770501', scheduled_time=FROM_UNIXTIME(1350944997), recurring_event='1', object_id='0' ON DUPLICATE KEY UPDATE instance_id='1', event_type='1', queued_time=FROM_UNIXTIME(1350944996), queued_time_usec='770501', scheduled_time=FROM_UNIXTIME(1350944997), recurring_event='1', object_id='0'[1350944996.775716] [002.0] [pid=32199] INSERT INTO nagios_timedeventqueue SET instance_id='1', event_type='1', queued_time=FROM_UNIXTIME(1350944996), queued_time_usec='770501', scheduled_time=FROM_UNIXTIME(1350944997), recurring_event='1', object_id='0' Hi, ok, it will be hard for me to evaluate issue further without direct access to you server. If you are paid subscriber of centreon then you can go directly to them (support.centreon.com) for the support.

Problem description When modifying a host-preset, services and other things related to that preset are not updated.

centreon not updating-2centreon not updating-18

These are predefined for each checkcommand and are set when a service is added.See also If you encounter any problems with your SNMP sensors, the first step after checking basic requirements is to debug SNMP activities in order to find communication and/or data problems in SNMP monitoring configurations.For this concern, Paessler provides a test program, the Paessler SNMP Tester, that runs simple SNMP requests against a device in your network.Couldn't find any information on this anywhere, so it was a day spent with wireshark and powershell until I figured it out. You must make sure that a proper backup of all your data is available. I have a perplexing issue with a new Centreon install.You can find in the \MIB subfolder of your PRTG installation. This is important for your firewall settings." I thought that SNMP used UDP ports 161 and 162?What would I set in my Windows firewall to accommodate the above statement? This may help you and others with Sophos firewalls, but we had to set the PRTG snmp version to V1.Although Centreon can be successfully used to add hosts and services to monitor and can export config files and make nagios work correctly, I only seem to get partial results in the centreon view.Looking at that pic, you can see that it knows that hosts and services are defined, but yet wont show them in the main window so you can view problems, stats, etc.For more information, please go to the following page: PRTG creates the log file for debugging purposes of MIB imports.This file contains all warnings and errors that might occur when reading an MIB file.

Leave a Reply

Your email address will not be published. Required fields are marked *

One thought on “centreon not updating”

  1. 2 View All Next »I want to introduce you to someone. She’s geeky to her Joss-Whedon-loving core, a Whovian, Vertigo-reading, 3rd edition D&D (none of that 4th ed crap thank you very much) gamer with the con stories to prove it. While it’s true that many men will use it as a polite dodge to avoid saying “I’m not attracted to you”, when it comes up over and over again, it’s a sign that maybe there’s more to it.